Perun V2 Hybrid MOSFET ETU

The Perun V2 Hybrid ETU unit replaces the mechanical contact surfaces of the VER2 gearbox of an airsoft gun and offers a bunch of useful features. The Perun V2 Hybrid is compatible with airsoft replica guns equipped with a Ver2 gearbox.

Optical and magnetic sensors eliminate many moving parts that are prone to damage, increasing reliability. Adaptive trigger adjustment allows you to change the trigger sensitivity from a very short trigger travel to a long pull, with almost any trigger. The Perun V2 Hybrid works without modification with most Tokyo Marui standard version 2 gearboxes.

Features:

Additional feature descriptions:

Adjustable Trigger Sensitivity - The trigger can be set to 5 sensitivity levels, ranging from very short to very long pull. No modifications to the trigger or gearbox are required and trigger sensitivity can be changed on the field.

Programmable Fire Patterns - Independently programmable fire patterns - Program the fire patterns as you wish by setting both selector switch positions to safe, semi, burst or auto.

Active Brake - The active brake stops the engine after each shot. This feature is especially useful at high rates of fire where the possibility of overspin is high.

Precocking - Fast trigger response can be the key to victory, especially in CQB games. When precocking is enabled, the piston remains in the rear position after each shot with the spring already compressed, ensuring that the next shot is fired immediately after the trigger is pulled. To release the spring after using precocking, pull the trigger and hold it for 2 seconds, after which another shot is fired, this time without precocking and with full braking.

2-stage trigger - A light pull of the trigger fires a single shot or burst, while a deeper pull fires a burst or continuous fire. The following modes are available: semi - burst, semi - auto, and burst - auto.

Binary Trigger - Allows for double-shot single-fire. When this mode is enabled, semi-automatic firing is set, shots are fired not only when the trigger is pulled, but also when it is released.

Rate of Fire Reduction - Reduces the rate of fire when firing in bursts or bursts. Conserves bullets and/or provides a more realistic rate of fire.

DMR Mode - Enables semi-auto mode to comply with any DMR rules on the playing field.

Low Battery Voltage Alarm - For Li-Po and Li-Ion batteries. If the battery voltage drops to a dangerously low level, the user will be notified with short beeps that repeat every minute. This can also be freely switched on and off.

DSG mode - sector gear detection mode designed for use in DSG (dual sector gears) configurations.

Diagnostic system - constantly monitors the weapon and the mosfet itself. If any problems occur, it immediately indicates what the cause may be. Makes troubleshooting much easier.

Electronic fuse - Protects the airsoft gun and battery in the event of a malfunction, for example. It automatically cuts off power when a short circuit or mechanical jamming of the mechanism/motor is detected.

All settings are programmed exclusively using quick and easy-to-remember fire selector switch and trigger pull sequences, supported by audible signals and a multi-color LED. This allows you to change settings at any time, in a matter of seconds, even under enemy fire. All settings are set independently for each selector position, so you can program the mosfet exactly the way you want.

The Perun V2 Hybrid works without problems with any 7-17V battery.