Name: GATE ASTER V2 Basic - Rear Wired
Brand: GATE
SKU: 35579
Price: 85 EUR
Availability: OutOfStock
Rating: 5 (1 reviews)

GATE ASTER V2 Basic drop-in MOSFET/microcontroller unit, rear wiring

GATE's ASTER™ is a microcontroller unit similar to the familiar TITAN MOSFET unit, but in practice it is not left behind in terms of features, especially in terms of price-performance ratio. The BASIC Edition ASTER is a durable and sufficient unit for all conditions, but it is possible to upgrade it, so you can get almost all the same features as the TITAN unit.

The idea behind ASTER is that, like the TITAN controller, it replaces the normal trigger mechanism of the weapon, after which the operation of your weapon is handled by optical sensors instead of mechanical interlocking switches.

GATE gives these a two-year warranty! Please note that the warranty does not cover your own mistakes. So if you are unsure about the installation, it is always a good idea to contact the store/installer.

Features:

Reverse polarity protection

250 settings for trigger sensitivity

The device is programmable either with a trigger or with the Gate Control Station app (Android, Windows and macOS. iOS compatibility coming in 2020)

Note: The PC/macOS version of GCS does not yet support ASTER!

Programming via trigger is made easier by the RGB LED

No need to remove the mechanical safety device

There is no need to modify the gearbox for installation. Krytac weapons do require the removal or modification of the lock release.

The unit supports all types of strollers

Supports Binary Trigger and AUG/Two-Stage modes

Maximum rate of fire approximately 50 rounds per second

Firmware can be updated online via the Gate Control Station

In the package:

ASTER™ unit

Chevron

Instruction card on features programmable via trigger

Installation kit

Quickstart Guide

Note! If you are using the ASTER unit with a Gate Control Station, you will also need a USB-Link

Features discussed in more detail:

Features programmable with the Basic version trigger :

The features programmable with the trigger can of course also be run via the Gate Control Station.

Fire modes: SAFE – SEMI – AUTO, SAFE – SEMI – SEMI, SAFE – BINARY – AUTO and SAFE – SEMI – BURST. In addition, you can run one preset with GCS!

Burst fire: adjustable to continuous (i.e. the weapon fires the entire burst with a single trigger pull) or intermittent, where the burst continues as long as the trigger is held down or the number of shots is full. Alternatively, a mode preset via GCS is also available.

Pre-tune: On / Off

Battery voltage protection: Off / Li-Po / Li-Fe

Low voltage alarm: Off / 3.2 V / GCS setting

Active brake: Auto / Off / GCS setting

Diagnostics: the unit communicates primarily through vibrations emitted by the engine. The key to interpreting the vibrations can be found in the quick start guide. Fault codes can also be reset using the trigger. In addition, resetting to default settings and factory settings can be done using the trigger.

The detection of machine cycles is automatically turned on. This can also be turned off in GCS!

Features programmable with the Basic version Gate Control Station :

Magazine size limitation: Off / 30 bullets. Similarly, the set can be limited to 30 bullets.

Rate of fire control: six settings. The unit does the job by limiting the current reaching the motor after the first shot.

Magazine change delay: off / 3 seconds

Battery voltage protection: off / Li-Po / Li-Fe

Low voltage alarm: off / 3.2V / 3.4V

Active brake: AUTO / 0% – 20% – 40% – 60% – 80% – 100%

Two-stage (aka AUG) trigger

Ball counter: There are four users to choose from; latest, user 1, user 2 and factory.

Diagnostics: fault codes, i.e. DTC codes, can naturally also be read via GCS.

Machine cycle detection: on / off

Updates, notification settings and configuration packages can be installed via the Control Station. You can also upgrade the BASIC unit to the ADVANCED version through this. The most important advantages of the ADVANCED version are statistics and ASTER World Ranking statistics.

The product has a one-year (2-year) manufacturer's warranty that covers defects and breakages resulting from normal use. The warranty does NOT cover defects or breakages resulting from installation errors or misuse. Warranty matters are handled directly with the manufacturer and instructions can be found on the manufacturer's website ( GATE Warranty Form ).

GATE Electronics is a Polish electronics company that was founded in 2008 and is focused on the airsoft market. GATE offers a wide range of MOSFET circuits for different needs: whether you need a MOSFET that only protects the mechanism and battery, or a MOSFET unit that can program all the functions of your gaming device. GATE products are easy to install and reliable in use. The quality of the products is ensured by careful testing and the use of user feedback in product development.